Shaanxi Zhongtuo Mine Equipment Co.,Ltd
Shaanxi Zhongtuo Mine Equipment Co.,Ltd
Add to Cart
Working Principle of Handheld Rod Splitter
It is composed of an oil cylinder, 11 pistons, multiple seals, and multiple high-pressure oil pipes. Divided into one oil inlet pipe and one oil return pipe. When the oil is fed, the piston of the hydraulic rock breaker will extend, which is a working process, that is, the time when the rock breaks. Its power source is the hydraulic oil transmitted by the hydraulic power station through the oil pipe, which can reach 100mp, and the theoretical splitting force is 1200t. A single root is 30kj, and a power station can be equipped with 6 more. Machine Standard equipped with is 4.
Technical Parameter of Handheld Rod Splitter
| Model | Length(mm) | Piston | Plunger | Hole | Extension | Weight(kg) |
| Quantity | Diameter(mm) | Diameter(mm) | Length(mm) | |||
| ZT90 | 650 | 9 | 35 | 87 | 15 | 27 |
| ZT100 | 710 | 8 | 45 | 112 | 25 | 47 |
| ZT110 | 820 | 11 | 40 | 100 | 22 | 44 |
| ZT120 | 770 | 8 | 45 | 122 | 15 | 60 |
| ZT130 | 1006 | 10 | 45 | 130 | 23 | 97 |
| ZT150 | 960 | 8 | 50 | 153 | 33 | 118 |
| ZT170 | 1004 | 8 | 60 | 174 | 34 | 166 |
| ZT200 | 1285 | 8 | 70 | 200 | 32 | 291 |
Advantages of Handheld Rod Splitter
1. When the hydraulic splitting rod is working, a rock drill and a DTH drill can be used to drill a hole with a large diameter, the hole depth is at least 1-2 meters, and then the hydraulic splitting rod is placed in the drilled hole, and the hydraulic pump is started. The hydraulic splitting rod extends out of the splitting hole at the same time.
2. The splitting rod is suitable for the mining of rocks of various textures, will not produce vibration, noise, dust, etc. during the work, and can realize silent mining without affecting the surrounding. It only takes a few seconds to rupture once, and it is a fast and fast mountain-making machine, such as the mining of marble, granite, bluestone, silica, calcite, and other stones.
3. When working, no vibration, impact, noise, or dust flying chips will be generated. Fully mechanized, it is based on the excavator as a power machine for auxiliary value-added, and works in conjunction with the excavator, which can be completed, environmentally friendly, and cost-effective.
Brief Introduction of Hydraulic Splitting Rod Supporting Equipment
(1) Power source
80mp belongs to the ultra-high pressure sequence, and the tightness between the various components must be of a high standard. The entire working process of the splitting rod relies on the ultra-high pressure oil station. In the design process of the gas station, we independently developed an intelligent device. When the pressure reaches 100mp, the motor will stop rotating, the oil pump will stop working, and the entire gas station will be in a pressure-holding state.
Chongqing hydraulic splitting rod | plunger splitting machine drilling 110mm good equipment for mining
This device has several advantages:
1 can prolong the service life of a hydraulic oil station
2 can make the pressure stable
3 It also saves a considerable amount of time in the actual operation process
(2) High-pressure oil pipe
Among all hydraulic equipment, the hydraulic oil pipe is the traffic fortress of the entire hydraulic system. It is responsible for transmitting hydraulic oil and requires extremely high compressive strength. If the quality of the hydraulic oil pipe is not good enough, there will be a pipe burst accident, which may cause personal injury to the worker, and there is a certain safety hazard. We should reject inferior hydraulic oil pipes. The high-pressure oil pipe used by our company has a high-pressure resistance of 350mp, while the split rod only needs 100mp. The oil pipe is mainly composed of an inner rubber layer, a middle rubber layer, 2, 4, and 6 layers of steel wire winding layer, and an outer rubber layer. The inner rubber layer has the function of making the conveying medium bear the pressure and protect the steel wire from erosion, and the outer rubber layer protects the steel wire from being damaged. Each high-pressure oil pipe must be tested by blasting before leaving the factory. After passing the inspection, it was put into the market. High safety factor, can be used with confidence.
Working Notices of Handheld Rod Splitter
In operation, the hole must be straight when punching, and the rod must be placed in the hole to ensure that the rod cannot be exposed. If not, this would result in uneven force and an unachievable blasting effect. Keep the horizontal plane, be a straight line, and at the same time face the air side.